The 19 Best Miter Saws of September 2020

Your purchase includes One CDEWALT DWS779 Sliding Compound Cord Miter Saw, 12-Inch, Carbide Blade, One Blade Wrench

Tool dimensions: 17” H x 24.75” L. Tool Weight: 56 lbs. Maximum Cutting Thickness: 6.75 inch

Other specifications: 15 Amps, 12” Blade diameter, 5/8” or 1” Arbor size. 3800 RPM motor. Type of milter saw: Slide

Exclusive back fence design cuts up to 2x14 dimensional lumber at 90 degree and 2x12 at 45 degree. Miter saw does not come with LED (sold separately) or laser cutting guide

Super-efficient dust collection system captures over 75 percent of dust generated

Backed by DEWALT'S 3 year limited warranty

Power and Durability: 15 Amp, 4,000 Rpm Motor

Miter Detent Plate Improves Productivity and Ensures Cutting Accuracy: Adjustable Stainless Steel Miter Detent Plate with 14 Positive Stops

Miter Dentent Override That Allows You to Override the Miter Stops and Adjust to the Desired Setting Without the Saw Slipping into the Miter Detents. Arbor Size Is 5/8 Inches

TALL SLIDING FENCES that support crown molding up to 5 1/4 Inch nested and base molding up to 6 1/2 Inch vertically against the fence while easily sliding out of the way for bevel cuts

Cross Cut Capacity Up to 2x8 Inch Dimensional Lumber at 90° and a 2x6 Inch Dimensional Lumber at 45°

Machined Base Fence support maintains fence perpendicularity with blade for cutting accuracy

Bevels to the left up to 48° and to the right up to 3°, with positive stops at 0°, 45° and 33.9° for cutting crown molding laying flat with 4 hardened steel bevel stops at 0°, 33.9°, 45° and 48° that delivers versatility at most common bevel angles

Includes a carbide blade, dust bag, blade wrench, vertical clamp and comfortable side handles in the base

Part of the V20 cordless system

7-1/4in. V20 20V max* miter saw has a powerful 3, 800 RPM motor for cutting 2x dimensional lumber, hardwoods, baseboard and trim with ease

Slide capacity allows for 8 in. Cross cut at 90 degrees and 5.5 in. Cross cut at 45 degrees

Capacity to cut 3-5/8 in. Nested Crown and 3-1/2 in. Baseboard vertically

Lightweight design at 21.8 lbs. With side carry handles make this unit extremely portable

3 Year Limited Warranty, refer to "Warranty & Support" section below for full details

Integrated XPS cross cut positioning system for better accuracy and visibility

Adjustable stainless steel miter detent plate has 10 positive stops

Oversized bevel scale

Compact, lightweight design (31.6 bs.) for easy transport and storage

POWER AND DURABILITY: 15 amp, 3,800 rpm motor

INTEGRATED XPS CUT LINE positioning system with LED light provides adjustment free cut line indication

MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops

MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents

EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts

CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90° and a 2x6-Inch dimensional lumber at 45°

DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material

HIGH VISIBILITY BEVEL SCALE that makes bevel adjustments fast and easy; 0-50 degrees left and right miter capacity for greater versatility

OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity; Precise miter system and machined-base fence support optimized cutting accuracy

LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability

New precise miter system

Handle design for added portability

Integrated XPS cross cut positioning system provides adjustment-free cut line indication

Powerful 15 amp, 3800 rpm motor delivers extended power and durability

Exclusive Back Fence design cuts up to 2X14 dimensional lumber at 90-degrees, 2 by 12 at 45 degrees

Adjustable stainless steel miter detent plate with 10 positive stops improves productivity, ensures accuracy

Innovative gearbox and belt drive design increases vertical cutting capacity

Super efficient dust collection system captures over 75% of dust generated

10" Compound Miter Saw

Same tools. New name. Hitachi power tools has renamed to Metabo HPT

Miter angle range: 0°-52°, to the right and left for increased flexibility

Bevel range: 0°-45˚, to the left with adjustable bevel stops for precision cuts

15 Amp motor delivers high power for the toughest of cuts

Large table for better material support with vice clamping system to secure work piece

Thumb actuated positive stops for quick miter adjustments

Carbon brush access allows user to replace brush as needed to greatly prolong the life of the tool

Axial glide system: The patented glide system allows wider cross cuts and better alignment while also being compact; This saves you 12 inch of valuable work space; Bosch glide miter saw also offers unmatched smoothness of cut

Capacity: Expanded cutting capacity 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring

Adjustable: The GCM12SD miter saw provides easy adjustments with a large easy to read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts; Category best 90 percentage dust collection optimized for cutting 2x material with a vacuum

Precision: Square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support

Ease of use: Upfront bevel controls all metal bevel lock lever and range selector located Upfront for quick and easy bevel settings without reaching behind the saw

Dimensions: Extended Tool - 32.5" H x 98" W | Folded Tool - 17" H x 59.5" W | Weight: 67 lb

Wide adjustable infeed and outfeed work supports provide up to 8' of material support

Easily adjustable mounting rails adapt to nearly any miter saw

Wide rubber grip wheels provide easy jobsite mobility

Three-position pneumatic assisted raising and lowering for the ultimate in flexibility and ease of set up

Durable tubular steel construction allows for a 300-Pound maximum weight capacity

☘【Double Speed & Powerful Motor】- Two different speeds for various materials. 3200r/min for soft metal and plastic, 4500r/min for wood，giving your cutting more choices. Powerful 15-amp motor gives more power and durability

☘【Two Sizes of Blades】- Equipped with 10 inch versatile blade and two 10 inch wood blades. It is perfect for cutting framing, molding, cross-cutting and miter cutting. The saw also has an extension table which provides more stable support for anything that you may be cutting on.

☘【Adjustable Angle】- Miter capacity is L45°~ 45°R . It also owns a 0°- 45° bevel range to the left that allows you to make most beveled cuts and has adjustable stops to allow for precision cuts no matter the angle.This is an all-around great saw

☘【Iron Guard & Double Safety Switch】- Iron Guard is able to withstand the daily rigors that come with working on a job site. Double Safety Switch protects you from any incidental injuries. Portable Handle realizes flexibility of use

☘【Laser Guide& Dust Vacuum Port】- Laser shows you where your cuts would go and allows you to make precise adjustments to the left or right. Dust collection system cuts down the number of dust particles that remain after a cut, making your cleaning much easier.

Powerful 15 Amp, 3,800 rpm motor delivers extended power and durability

Exclusive Back Fence Design cuts up to 2x16 dimensional lumber at 90° and 2x12 at 45°

Super efficient dust collection system captures over 75% of dust generated.

Wide adjustable infeed and outfeed work supports provide up to 8' of material support

Easily adjustable mounting rails adapt to nearly any miter saw

Wide rubber grip wheels provide easy jobsite mobility

Powerful 15 Amp, 3,800 rpm motor

Tall sliding fences, and exclusive back fence design

Adjustable stainless steel miter detent plate with 10 positive stops

Oversized bevel scale

Compact, lightweight design.Vertical Capacity: Crown Molding Vertically Nested:5.5 inches

Portability: Compact size for ease of transportation and storage

Easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate

Variety of cuts: 24.5 inches of rip capacity for ripping 4x8 plywood or OSB sheets

Power: 15 Amp, 5800 rpm motor

Onboard storage: Onboard storage provides easy access to the site pro guarding components and push stick when not in use

Guaranteed tough: Metal roll cage ensures job site durability

10" Compound Miter Saw with Laser

INCLUDES: C10FCH2S Miter Saw, 10" 24T TCT Saw Blade, Pivoting Flip Fence, Dust Bag, Vise Assembly (322952), 10mm Box Wrench (940543), 4mm Hex Bar Wrench, Material Support Extension

MOTOR: 15 Amp motor, powerful for the toughest cutting jobs

Same tools. New name. Hitachi power tools has renamed to Metabo HPT

MITER ANGLE RANGE: 0-52 Degree miter angle range to the right and left for increased flexibility

BEVEL ANGLE RANGE: 0-45 degree bevel angle range, to the left with adjustable bevel stops for precision cuts

LASER MARKER SYSTEM: Increased cutting accuracy

LARGE PIVOTING FLIP FENCE: Raises 4" for cutting crown molding vertically

HANDLE: Horizontal handle with soft, vibration reducing elastomer grip adds comfort and control

LIGHTWEIGHT: Only 26. 5 lbs making it a great saw to carry to the job site

Flexible - power of corded. Freedom of cordless. The world's first battery that automatically changes voltage when you change tools

Runtime; Up to 289 Cross Cuts in 3-1/4" baseboard molding

Powerful 120V Brushless motor provides longer runtime compared to Brushed motors

CUTLINE blade positioning system; adjustment free cutline indicator

Portability - Compact design weighs only 56lbs.

🔥 2 Adjustable Speed & 3 Blades: By pressing the switch, you can convert between the two speeds (3200 RPM or 4500 RPM) effortlessly for more precise cutting, high speed for wood while low speed for metal. While the Tacklife EMS01A miter saw is equipped with 3 blades: two 10" 40T TCT blades for wood and plastic, and one multifunctional 10" 48T TCT blade for versatile use. Richer accessories provide a wide range of choice for your operation.

🔥 Bevel Cutting & Laser Guide: The free bevel range from 0° to 45° allows you to do bevel cutting for more purposes.The Angle of the miter table is -45°/ 0°/ + 45° and the positive angles in all these directions are 0°, 15°, 22.5°, 30° and 45°, respectively.The laser is attached to accurately track real-time position and allows you to perform precise cutting.

🔥 Durable Tool & Iron Blade Guard: Solid iron self-retracting saw shield is more durable than plastic and transparent saws, the teeth cover of the cutting blade can protect you from accidental mishaps. The sliding cut design allows you to cut longer planks. Made of stainless steel castings, it provides you with a strong saw and is well suited to withstand the daily work of the work site.

🔥 Dust-free Environment & Extension Table: An additional chip bag connects directly to the saw to help collect sawdust away from the workpiece during cutting. A 35mm dust port allows you to connect your vacuum cleaner with an adapter to capture more dust. An extension table with vice clamping provides better support and balance, increasing the stability during cutting.

🔥 Rich Accessories & 2-year Warranty: TACKLIFE advanced 10-inch 15-amp miter saw, 1*10" multi-function blade, 2*10" blades for wood, 1* dust bag, 2*hexagonal wrench, 1* clamping device, 1*user Manual, 1*warranty card, 24 months Warranty. If you have any displeasure or question for us, please contact us by email: [email protected]

ACCURACY: The Bosch-exclusive Axial-Glide System allows wider cross cuts and better alignment

CONVENIENCE: Featuring large, upfront metal bevel controls and Square lock precision fences for precise, quick and easy adjustments. Complete with dust collection chute and vacuum adapter for easy clean-up.

CONTROL: This miter saw provides accuracy and cutting control at all angles. Crown/chop lock locks head in place for maximum chop cutting capacity for upright base moulding and nested crown.Depth Front-to-Back, Not Including Arm:30 inch

COMPACT: Featuring a compact design that replaces the sliding rail system, taking up to 10 In. less workspace than a slide miter saw. This Bosch miter saw is perfect for tight quarters where other saws just won’t do.

COMFORT: Large, form-fitting ergonomic ambidextrous trigger handle with soft grip provides maximum comfort for all-day use while the clear lower guard allows for unobstructed visibility throughout the cutting job.

Lightweight unit is easy to move from room to room or even from job to job

Table extensions help support long work pieces

Spindle lock holds spindle securely while bade nut is loosened and removed

Bevels left - from 0°- 45°, cuts Nominal 2X12 at full bevel

Improved laser – with on/off switch. Makes aligning blade to work piece more convenient and precise cuts

Solid saw stability – easily and quickly mount your Miter saw or other power tools on this super secure saw stand work bench. Saw safely with precision, and without any wobbling or movement.

Extendable work space – need a larger work area in your tool shop? Not a problem! The porta cube's two 30” Wings can fold outward and lock into place, providing you with 60” or a full 90" Workspace. The collapsible wings include moveable inserts that align level with your saw.

Convenient mobility – the workstation includes a handle and wheels, allowing it to be easily moved from one area to the next. This rolling stand is perfect to use when space is a consideration or for efficient transportation to different work sites

Saw flips away – when not used for cutting, the saw table area reverse flips, allowing the stand to become a full, level table to be used for planning, measuring and working on other projects. When the saw is flipped down, it stays safely attached and out of the way.

Superb specs – with its strong steel structure, and composite wings, this versatile miter saw stand brings a modern, clean look and superior functionality to any shop. It has peg holes and measures 31”W x 34”h x 29” with heavy duty 10 inch wheels. Our 1-year allows you to buy with confidence.